Для Chevrolet Sonic новый 7 "радио сенсорный экран 12-16 Son of Mars 7 дюймовый резистивный экран центрального управления

Описание

1.外形 Shape 外形、结构和尺寸详见图纸 Shape, structure and dimension are referred to attached drawing 1.1 结构 Structure 结构 Structure 所用材料 Material used 备注 Remark 上线 Top Circuit ITO 薄膜 ITO FILM 雾面防牛; 单层膜;厚度: 0.188mm Clear Hard-coating;Double Layer; Pair Thickness: 0.188mm 下线 Bottom Circuit ITO GLASS 厚度: 1.1mm Thickness: 1.1mm 1.2 外形尺寸 Shape dimension 项目 Item 尺寸 Dimension 单位 Unit 外形尺寸 Out Dimension 164.9*100 mm 可视区 View Area 157.1*89.6 mm 绝缘点间隔 Spacer Dots Pitch 3*3 mm 2.特性 Characteristics 2.1使用、保存环境 Operation and storage 项目 Item 值(条件) Value (conditions) 备注 Remark 使用温度范围 Operation temperature & Humidity 湿度 20％～90％： ���结露状态 －10℃～60℃ Humidity：20-90％ non dew condensation －10℃～60℃ 单体状态下 In a single substance 保存温度范围 Storage temperature & Humidity 湿度 20％～90％： 非结露状态 －20℃～70℃ Humidity：20-90％ non dew condensation －20℃～70℃ 单体状态下 In a single substance 2.2电气特性 Electrical characteristics 项目Item 值 Value 备注 Remark 最大电压 Maximum voltage 直流7V DC7V 端子间阻抗 Resistance between terminals Ｘ方向(Film面)：180～900Ω X direction [Film side]: 180～650Ω Ｙ方向(Glass面)：180～900Ω Y direction [Glass side]: 180～900Ω 直线性 Linearity Ｘ方向：≤3% 以内 X direction: within ≤2% 测试方法如图所示 Testing method as following drawing Ｙ方向：≤3% 以内 Y direction: within ≤2% 线性Linearity= ︳｛(Vp-Vx) / (Va-Vb)｝︳x100〔%〕 Va= 起点输入电压 Input voltage at start point Vb= 终点输入电压 Input voltage at end point 测试力 Test force:150gf 绝缘阻抗 Insulation resistance 直流 25Ｖ 10MΩ以上 DC 25V 10MΩ or more 连接X+ ~ X-和Y+ ~ Y-,使用 25V DC 在 X 和Y 测试。 Connect X+ ~ X- and Y+ ~ Y-, apply 25V DC between X and Y for perform measurements 响应时间 Chattering 10 毫秒以下 10 msec or less 额定电压 Rated Voltage 直流 5V DC 5V 2.3 机械特性 Mechanical characteristics 项目 Item 性能 Performance Remark 备注 输入方法 Input method 用专用笔或手指触控 Use of an exclusive pen or finger 动作荷重 Load upon operation 专用笔 Exclusive pen 150g 以下 150g or less 使用笔来进行操作或测试时，其笔尖端材质必须符合以下条件：笔尖材质：Polyacetal（聚纤维酯） 笔 端：笔径 Φ3.0 mm 、表面弧度SR 0.8 mm Operation and measurement with a pen must be carried out under the following tip conditions : Stylus pen material:POM (Polyacetal) Tip:Diameter3.0mm, SR0.8mm 手指输入 Finger 150g 以下 150g or less 使用特定工具来代替手指进行操作和测试，其材质必须符合以下条件 Operations and measurement methods simulated for a finger must be carried out under the following tip conditions : 材 质：硅橡胶(硬度: 30°Hs) 顶 端：笔径 Φ12mm、表面弧度SR12.5mm Material: Silicon rubber(Hardness : 30°Hs) Tip: Diameter12.0mm, SR12.5mm 表面硬度 Surface hardness 铅笔硬度3H 以上 Pencil hardness: 3H or more 依据JIS K5600试验方法 It complies with the way of test method JIS K5600 备注: 由绝缘点的大小及间距来决定操作压力的大小。 Remark: The operation force depending on the diameter & pitch of spacer dot. 2.4 光学特性 Optical characteristics 项目 Item 性能 Performance 备注 Remark Total light transmittance 全光线透过率 80%以上 80% or more JIS K7105 雾值 Haze 3%以下 3% or less JIS K7136 Film规格 Film specification 雾面防牛防刮 ，有一定表面硬度 Clear Hard-coating,type with hard-coating surface 3.信耐性测试 3.1 环境实验 Environment Test 项目 Items 内容 Contents 备注 Remark 高温保存 High temperature preservation (1)温度80℃,放置240小时；(2)室温放置24小时以上；(3)然后测量以下项目： (1)Store at 80℃ for 240 hours; (2) Keep at a room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: 端子间阻抗：参照电气特性栏Resistance between terminals: refer to electrical characteristics item; 直线性：参照电气特性栏 Linearity: refer to electrical characteristics item; 绝缘阻抗：参照电气特性栏 Insulation resistance: refer to electrical characteristics item 低温保存 Low temperature preservation (1)温度－30℃,放置240小时；(2)室温放置24小时以上；(3)然后测量以下项目： (1)Store at -30℃ for 240 hours; (2) Keep at a room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: 端子间阻抗：参照电气特性栏Resistance between terminals: refer to electrical characteristics item; 直线性：参照电气特性栏 Linearity: refer to electrical characteristics item; 绝缘阻抗：参照电气特性栏 Insulation resistance: refer to electrical characteristics item 高温高湿保存 High temperature & high humidity (1)温度60℃ 湿度90%,放置240小时；(2)室温放置24小时以上(3)然后测量以下项目: (1)Store at 60℃and 90% RH for 240 hours; (2) Keep at a room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: 端子间阻抗：参照电气特性栏Resistance between terminals: refer to electrical characteristics item; 直线性：参照电气特性栏 Linearity: refer to electrical characteristics item; 绝缘阻抗：参照电气特性栏 Insulation resistance: refer to electrical characteristics item 冷热冲击测试Heat shook test (1)－30℃(30 分钟)→80℃(30 分钟)共100次循环;(2)室温放置24小时以上;(3)然后测量以下项目： (1)－30℃(30min)→80℃(30min)total 100 cycles, (2) Keep at a room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: 端子间阻抗：参照电气特性栏Resistance between terminals: refer to electrical characteristics item; 直线性：参照电气特性栏 Linearity: refer to electrical characteristics item; 绝缘阻抗：参照电气特性栏 Insulation resistance: refer to electrical characteristics item 3.2 Durability Test 耐久试验 项目 Items 内容 Contents 备注 Remark 耐敲击 Hitting Durability (1)使用Placental (POM)铅笔(R0.8) 敲击100 万次。(2)然后测量以下项目： (1)Hit 1,000,000 times with a Placental (POM) pencil (R0.8); and (2) Measure (satisfy) the following items: 荷重：250gf Load:250gf 速度：2次／sec Speed: 2 times/sec 端子间阻抗：参照电气特性栏Resistance between terminals: refer to electrical characteristics item; 直线性：参照电气特性栏 Linearity: refer to electrical characteristics item; 绝缘阻抗：参照电气特性栏 Insulation resistance: refer to electrical characteristics item 耐久划线 Sliding Durability (1)使用Placental (POM)铅笔(R0.8)在AA区域边缘内缩3mm往复划线性10万次；(2)然后测量以下项目： (1)Shuttle 100,000 times with a Placental (POM) pencil (R0.8) shrinks 3mm from the AA verge; and (2) Measure(satisfy) the following items: 荷重：250gf Weight:250gf 速度：100mm／sec Speed: 100mm/sec 端子间阻抗：参照电气特性栏Resistance between terminals: refer to electrical characteristics item; 直线性：参照电气特性栏 Linearity: refer to electrical characteristics item; 绝缘阻抗：参照电气特性栏 Insulation resistance: refer to electrical characteristics item FPC 弯曲 FPC Bending durability (1) 在FPC末端附上100g力；(2)接着以附着力的部分作为弯曲中心(各弯曲180 度5 回)。结果应该满足以下几项： (1) Attach a 100 g weight to the end of FPC; (2) Bend the FPC at the angle of ±180°each for 5 times, with the FPC adhered portion as the center of bending movement. The result shall satisfy the following items: 端子间阻抗：参照电气特性栏Resistance between terminals: refer to electrical characteristics item; 直线性：参照电气特性栏 Linearity: refer to electrical characteristics item; 绝缘阻抗：参照电气特性栏 Insulation resistance : refer to electrical characteristics item FPC 拉力测试 FPC Heat Seal Peeling Testing (1) 垂直90°方向：0.5千克力5分钟；不可剥离；应满足以下项目： 端子间阻抗：参照电气特性栏； Verticality 90°direction: After 0.5Kg 5min there is no peeling; The result shall satisfy following items: Resistance between terminals: refer to electrical characteristics item (2) 水平180°方向：0.5千克力10分钟；不可剥离；应满足以下项目： 端子间阻抗：参照电气特性栏； Horizontal 180°direction: After 0.5Kg 10min there is no peeling; The result shall satisfy fallowing items: Resistance between terminals: refer to electrical characteristics item 金手指处焊接性 Gold-finger sold heat 温度：320+/-5℃；时间：3-5秒；焊点光滑圆润 Temperature: 320+/-5℃; Time: 3 – 5 sec, sold-dot smooth surface

Характеристики